top of page

BIO AQUA TREATMENT

Increases water quality

Bio-Aqua-Treatment is a synergistic blend of microorganisms, enzyme catalysts and beta 1, 3 glucan, which are some of the key elements required for water balancing. Bio-Aqua-Treatment assists in maintaining water quality during the crop cycle by controlling algae, ammonia and nitrites, while reducing organic bottom wastes as well as controlling the phytoplankton bloom.

​

KEY ADVANTAGES

  • Promotes faster degradation of organic matters

  • Decreases nutrient levels

  • Improves dissolved oxygen and the balance of algae growth

  • Utilizes organic matter

  • Provides good settle ability of suspended solids

  • Improves the water clarity in aquaculture systems

  • Reduces ammonia levels, nitrates, algae and sludge build up

  • Reduces the risk of infection and improves survival rates

  • Reduces stock losses due to toxic ammonia

  • Reduces or eliminates the time required to oxidize the pond bottoms between growing cycles

  • Assists in controlling H2S gases

​

APPLICATION

Bio Aqua Treatment is harmless to humans, birds, fish, and plant life. They provide biological control that is completely compatible with maintaining a natural ecological balance. Bio Aqua Treatment can be used in: fish hatcheries, aquaculture farms, golf course ponds, fountains, aerated lagoons, lakes and inland fishing ponds.

​

OPTIMUM CONDITIONS FOR USE

The bacteria in Bio Aqua Treatment perform within a pH range of between 6.0 and 9.0, with optimum activity near a pH of 7.0. Temperature affects the growth rate of the bacterial population and activity improves with a temperature of between 37°C and 38°C (99°F to 100°F). No appreciable activity can be expected below 5°C (40°F) and above 40°C (104°F). For best results, the make-up water temperature range should be between 21°C and 31°C (70°F to 90°F)

​

PRODUCT PREPARATION

Bio Aqua Treatment can be added directly to the waste influent stream, pond, aerated basin or lagoon. For toxic wastes or short retention times, re-hydration for between 30 to 90 minutes prior to its addition to a waste system is recommended, using 9 litres of water per 500g of Bio Aqua Treatment

Abstract Water

MOLEAER

Bloom.jpg
bottom of page